| After-sales Service: | 12 Months |
|---|---|
| Warranty: | 12 Months |
| Type: | Malting Machine |
| Application: | Wheat |
| Appearance: | Vertical |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 1.Wheat scourer has good rubbing effect, good sealing, convenient maintenance, long bearing life and beautiful appearance.
2. Wheat scourer is suitable for light beating in wheat surface treatment.
3. The output per unit area is larger and the power consumption is less.
4. The structure of wheat scourer is simple, the center of gravity of the body is low, and the fan is provided.
5.The inner surface of the cylinder is made of white cast iron liner with tooth plate or smooth plate, which is wear-resistant, easy to maintain and low in cost.
The horizontal beater is simple in structure, small in volume, low in dynamic consumption, high in efficiency, convenient in operation and mainitenance, and easy to control automatically. It is mainly used for dry cleaning of wheat, rye and other grains. According to the strength of striking power, threshing can be divided into "light striking" and "heavy striking". The former has mild effect and is generally used before wheat moistening; The latter has strong striking effect and is generally used after moistening wheat.
Working process
When working, the wheat enters the machine from the tangential direction of the feeding port. Due to the high-speed rotation of the rotor and a certain torsion angle at one end of the blade, the wheat is constantly pushed from the feeding port to the discharging port under the action of the blade. In the process of threshing, the wheat grain is hit by the high-speed rotating blade. At the same time, the wheat grain sometimes moves with the threshing blade, sometimes lags behind the movement of the threshing blade, resulting in the friction and friction between the wheat grain and the threshing blade, between the wheat grain and the sieve tube, between the wheat grain and the wheat grain, so that the dust, wheat wool, etc. on the surface of the wheat grain and in the belly ditch can be cleaned up. The wheat is discharged from the discharge port under the push of the beating plate, and the impurities are discharged from the discharge port through the sieve tube due to the external suction and gravity of the sieve tube.
Working principle
The material is fed from the feed port to allow the material to enter the brushing zone.
The brush plate on the rotor rotating at high speed strongly rubs the wheat to achieve separation of the material.
At the same time, the brush plate on the rotor pushes the wheat to the outlet end while wiping the wheat.
The separated dust forms the undersize, and the undersize is discharged from the bottom ash outlet.
|
Type |
Yield(t/h) |
Sieve tube Diameter (mm) |
Power(KW) |
Weight(KG) |
Dimension LxWxH(mm) |
|
FDWM30x63 |
2~4 |
300 |
5.5 |
350 |
1452x818X1413 |
|
FDWM40x100 |
6~8 |
402 |
5.5~7.5 |
450 |
2090x920X1770 |
|
FDWM40x150 |
8~12 |
402 |
7.5~11 |
600 |
2590x920X1770 |
|
FDWM40x150x2 |
16~24 |
402 |
(7.5~11)x2 |
1170 |
2590x1330X1770 |
The technological effect of horizontal wheat beater can be evaluated according to the following indexes (under the rated flow rate).
1.After each threshing, the ash content of wheat should not be less than 0.02%.
2.After each threshing, the increase of broken grain is not more than 0.5%.
3.No more than 1% of normal intact grains in the lower foot.
4.The removal rate of sludge is not less than 70%
Features
1. The structure of wheat scourer is simple, the center of gravity of the body is low, and the fan is provided. The inner surface of the cylinder is made of white cast iron liner with tooth plate or smooth plate, which is wear-resistant, easy to maintain and low in cost.
2. Wheat scourer is suitable for light beating in wheat surface treatment.
3. The output per unit area is larger and the power consumption is less.
Working principle
The wheat enters the working cylinder from the feeding port and is hit by the high-speed rotating beating plate. The wheat grains collide and rub with the working face. The impurities such as mud lumps are crushed, and the mud and wheat wool on the surface of the wheat grains are wiped off. These light impurities are sucked into the low-pressure area and enter the fan through the flower iron screen. The hit wheat is pushed to the discharging port by the beating plate, After passing through the pressure valve, it falls into the outlet and is subjected to a strong suction, and the light impurities are sent to the external dust collector for sedimentation through the fan.
Packaging Details
1. We will pack all single machine with the plastic film.
2.Fix the machine on the container for the safety of long-time transportation of goods.
3.Some special unit will be putted into the box to avoid any damage or missing.
4.Small parts will be putted into the bags, boxes or make special packaging.
5. According to customer requirements, each product is labeled with name and quantity.
Port:Dalian,China
Liaoning Golden Grain Grain and Oil Machinery Co., Ltd was established on August 30,1992 in Shenyang, China.
Our company has nearly 30 years professional experience in manufacturing Grain Machinery,the main products includes :Maize Milling Machine,Rice Milling Machine,Wheat Flour Milling Machine,Sorghum Milling Machine,Millet Milling Machine and Oil Refining Machine.
Factory covers an area of 20000 square meters, 6000squrare meters office building area,owns high quality standard heavy industrial production workshops.Employees includes medium and senior professional management personnel, engineering technical personnel and professional foreign trade team sales staff.
We design products according to customers' specific requirements with carefully installation and technical training. Products have been exported to many countries such as:Russia,North Korea. Viet Nam, Nigeria, South Africa, and Southeast Asia. We are willing continue to expand our business around the world.
Q:Are you a factory or a trading company?
A:We are a factory with a history of 30 years. Our factory integrates R&D, production, sales and after-sales, and produces high-quality, precise and new products that are marketable.
Q:Where is your company located? From which port do you ship?
A:Our city is located in Shenyang, the heavy industrial base of China and the capital of Liaoning Province. We ship from Dalian port.
Q:How long is your delivery time?
A:Gengrally it is 3-5 working days if the goods are ont in stock.or it is 15-20 working days if the goods are not in stock.
Q:What is your terms of payment?
A:30% T/T in advance,balance before shippment.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}